Fila PS87
| Degreasing cleaner wax remover | ||
 |
Packaging 1 litre flasks in box of 12. 5 litre flasks in box of 4. |
DILUTION AND COVARAGE: With one litre: Maintenance: 1:20 200 m2 Wax remover 1:5 0 m2 Init. Cleaning of Stone 1:5 30 m2 “Coverage rates are approximate and refer to a single coat of the product” |
| WHAT IT`S FOR: | ADVANTAGES: | HOW IT`S USED: |
Diluted: cleans and removes grease from dirty porcelain stoneware, ceramic, natural stone, terracotta and concrete floors. Undiluted: removes stubborn stains from porcelain stoneware. It is excellent for basic cleaning of acid sensitive stone. Ideal for basic cleaning of concrete. Wax remover for water based, metal or polishing wax. |
A 3-in-one solution: stain remover, detergent and wax remover. The only product that removes stubborn stains from porcelain stoneware. Cleans without damaging the surface. Extremely easy to use. Removes epoxy grout residues. |
Dilution: depending on use To clean all surfaces: Dilute 1:10 to 1:20 and apply to the surface. Leave to act for a few minutes then clean with a single-disc professional cleaner or a scrubbing brush. Vacuum or wipe up dirt and then rinse with plenty of water.For a deeper clean, dilute to 1:5. To remove stains from porcelain stoneware Pour undiluted directly onto the mark and over the entire surface of the tile. Allow to dry completely, then wash and rinse. To remove wax Dilute 1:5, spread and leave to act for a few minutes. Scrub with a scrubbing brush or a single-disc cleaner. Vacuum or wipe up dirt and then rinse with plenty of water. To remove epoxy grout residues Apply the product undiluted, leave to act for 15-20 minutes, scrub with an abrasive disc, then rinse. Caution: 1. Do not use on marble or polished stone. 2. Do not use on wood. 3. Do not use on methacrylate tubs |
|
|
|
|
| COMPOSITION: | LABELLING: | TECHNICAL INFORMATION: |
Contains: EDTA and salts <5%, soap >5% but <15%. Other components: fragrance, linalool, limonene. Storage temperature: between 5° C and 30° C. Must be applied to material at temperatures between 5° and 30° C. |
No risk or safety labels or warnings are required since the product is not classified as hazardous under current regulations. |
Appearence: pale yellow liquid Odour: pine fragrance Density: 1.010 kg/litre pH: 12,7 The information above reflects our latest technical know-how and is the outcome of ongoing laboratory research and testing. However, some factors are beyond our control. It is essential to integrate our suggestions with your own on-site preliminary tests and check. Fila accepts no liability for improper use of its products. |
|
|
|
|